Canon Pixma MX490 Wireless Setup

With the rapid growth of technology, the requirement of the multi-purpose printer also increased with the different connectivity options.  Canon is one of the most trusted and popular manufacturers of printer products. Models like Canon Pixma MX490 are ruling the hearts of customers with its ultimate features and incredible capabilities. Being a Multifunctional printer, Canon Pixma MX490 wireless setup can fulfill your printing, copying, scanning, and copying requirements without any requirement of purchasing the additional accessories.  The main features of Canon Pixma MX490 wireless setup involve the compact design and high accessibility.

canon pixma mg3620 wireless setup

With a compact design, the machine can be placed anywhere without occupying much space.  The printer is not exceptionally fast when it is about the speed, but fast enough to execute home and office printing task. In this guide, we are going to download canon mx490 wireless setup for the computer. Follow the step by step instructions carefully to avoid any kind of mistake in the setup process.

Canon Pixma mx490 wireless setup

To establish an error-free wireless connection between the printer and computer, it is important to configure it correctly. This can’t be ignored, but first, you have to learn about this. It is known as the access point. Some of the access points are programmed with automatic connection known as WPS. It allows compatible devices to connect with the network.

When you are using the WPS, you do not need the password to connect the printer to the network. You just need to turn on the wireless network and choose the available connection for Canon Pixma mx490 software download and wireless setup.

  • Check the hub manual book. You also need to check whether the hub supports the WPS button.

  • Check the available network. It should be WPA or WPA2.

Once you get the information, proceed with the wireless configuration:

  • Turn on your Canon Pixma Printer. 

  • Press the wireless button on the printer and hold it until the indicator light gives you the signal.  It must blink once.

  • You can see an indicator lamp present near the wireless button. When the lamp is blue, you need to press and hold the WPS button on the access point for at least 2 minutes.

  • After that, you can notice that the wireless indicator lamp start blinking. This means that the Canon Printer is trying to find the network available.

  • Wait until the wireless lamp indicator and power blinks at the same time. During the process. Your printer has discovered the access point and trying to make the network connection.

  • If your Canon printer is connected to the available network, the power and wireless lamp will not blink together anymore.

Download Canon mx490 Wireless Setup

With the help of the aforementioned steps, you can setup Canon Pixma mx490 without any hassle.  This guide will work only with the routers or hubs that support the WPS Protocol.  If you are unable to establish a wireless connection between the computer and printer after coloring this guide then we recommend you take expert advice. There could be several factors that may stop you from establishing the connection like the access point type and router or hub. The expert can help you to discover the factors affecting the printer connectivity and suggest the best possible solution to fix the issue. However, if you follow this guide carefully, you can complete the Canon Pixma mx490 wireless setup and able to use the printer immediately.

Canon Pixma mx490 Software Download

CALL US TOLL-FREE