HP OfficeJet pro 8600 troubleshooting

HP OfficeJet Pro 8600   is a very popular printer option for home and business small printing solutions.  The printer comes with many fascinating features to make the user experience better than ever before.  However,  just like any other printer,  HP OfficeJet Pro 8600  is also prone to many technical issues.  Fortunately,  with the help of some simple HP OfficeJet pro 8600 troubleshooting guidelines, you can fix those concerns.  In this post,  we are going to discuss some simple troubleshooting steps,  that can help you to deal with  HP Officejet Pro 8600 printer problems.  So follow the HP OfficeJet pro 8600 troubleshooting guidelines,  and mitigate the problem as soon as possible. 

The printer is not connected to the Network

  • Check and make sure that your ethernet cable is not connected to the printer or device.  Ethernet cable turns off the wireless capability of the printer.
  • While establishing the button connection,  make sure that you enter the correct network name (SSID)  and the password.  Check the backside of your Wi-Fi router you want to connect.  Setup instructions of wireless setup Wizard carefully to avoid mistakes.

The ‘Problem With Ink System ‘ Error Showing

There is a higher possibility that your ink cartridges are leaking due to which you are encountering this problem.  Follow the given steps to fix this:

  • Turn on your printer,  and open the ‘ Ink cartridges access door’.
  • Push the front of ‘First Ink Cartridge’ to remove it from your printhead. 
  •  Check if there is any leakage in the ink cartridge,  and if necessary then replace it with the new one.  Otherwise,  you can just slide the cartridge back to the colour coded slot and push it gently until it takes place. 
  •  Repeat the second and fourth steps for all the Ink cartridges.
  •  Close the access store and check if the problem is fixed.

Paper shreds stuck on the printhead

If there is any paper jam error on the printhead path,  follow the steps below:

  •  Turn off your HP printer and disconnect it from the power outlet.
  •  Place your finger into the slot carefully on the left side of your printer, and pull it to open the access to the ink cartridge.
  • Check for the torn pieces of paper, and remove them gently from your device.
  • Close the access door and reconnect your printer to the power source.
  • Try to print the document again.

‘Pick Motor Stalled Error

If your printer is unable to pick up and see the paper from the tray,  you can follow the guidelines below for HP 8600 printer troubleshooting.  This problem can be fixed by resetting the printer.  Here are the steps:

  • Turn on your printer,  and wait till it completes the booting process.
  •  While your printer is turned on,  disconnect the power cord from the rear of the printer and unplug it from the power outlet.
  •  Wait for at least one minute.
  •  Plug the power cord to the electric outlet and reconnect it to the rear of your printer.
  •  Turn on your printer and continue with a smooth printing experience.

Missing or Failed Printhead Error

 To fix this problem, follow the guidelines below:

  •  The software issue could be the reason behind your problem,  so turn it off and turn on the printer again.
  •  You may need to restart all the print heads to fix the problem.  For resetting the printhead, you can follow the manual guide of the printer.

Hopefully,  with the help of simple troubleshooting guidelines,  you can fix the fix HP OfficeJet pro 8600 problems on your device.  In case,  you are still encountering the errors with your HP OfficeJet Pro 8600 printer, we suggest you contact the printer experts and take their advice to find and fix the problem.   The professionals will share the best troubleshooting solution to your problem and make sure that your printing experience does not get compromised.